Cisco UCS Fabric Interconnect MAC Pool

Shares


[tweetmeme]
In this tutorial I will guide you through creating a MAC pool which will be assigned to your vNIC’s via a service profile.

1. Log into Cisco UCS Manager and click on the LAN tab – LAN – Pools – MAC Pools. Right click Mac Pools and select Create MAC Pool. Give the Pool and name and Description. Click Next.


2. Click Add to Add a MAC address block.


3. Enter in a MAC starting point, this can be any hex numbers that you like, then specify how large you would like the block of addresses to be. In this example I will be creating a MAC address block of 256. Click Ok.


4. The MAC address pool is now listed. Click Finish.


Disclaimer:
All the tutorials included on this site are performed in a lab environment to simulate a real world production scenario. As everything is done to provide the most accurate steps to date, we take no responsibility if you implement any of these steps in a production environment.

  • Ttrinh00

    This is not boot policy, this is a mac pool creation.

    Could you please post the Boot policy document?

    • To locate the bios policy click on Tutorials – Cisco – Cisco UCS – Cisco UCS Fabric Interconnect Bios Policy Setup