Cisco Nexus 1000v Configuration and Installation on VMware vSphere 5.1 Video Tutorials

Shares

Cisco Nexus 1000v installation and configuration on VMware vSphere 5.1

This is a 4 part Video Tutorial series that walks you through the installation and configuration of the Cisco Nexus 1000v Virtual Switch with VMware vSphere 5.1


Cisco Nexus 1000v

Cisco Nexus 1000v Part 1 – OVF install and the installation wizard

In Part 1 we look at install a Primary Cisco Nexus 1000v Virtual Switch into VMware vSphere 5.1. We deploy the OVF image and run through the install wizard.

Cisco Nexus 1000v Part 2 – Physical and Virtual Port Profiles

In part 2 we look at creating both a Physical and Virtual Port Profile via the CLI.

Cisco Nexus 1000v Part 3 – VMware Host Physical NIC Migration along with Port Group Migration

In part 3 we migrate our physical VMware hosts network interface cards over to our Cisco Nexus 1000v Physical Port Profile. Lastly we migrate our VMKernel Ports and Port Groups.

Cisco Nexus 1000v Part 4 – Install a Secondary Redundant Nexus 1000v Switch

In the final part to this video tutorial series, we run through installing a secondary Cisco Nexus 1000v Virtual Switch for high availability and redundancy.

Disclaimer:
All the tutorials included on this site are performed in a lab environment to simulate a real world production scenario. As everything is done to provide the most accurate steps to date, we take no responsibility if you implement any of these steps in a production environment.